Method 6: Reinstall RAM
1. Turn off your computer and disconnect the power cable.
2. Open the computer case and carefully remove the memory card from the memory slot.
3. Then clean the RAM modules with compress air or a soft-bristl brush.
4. Install the RAM back into the slot. Close the case, start the computer and see if it boots normally.
1. Open your BIOS settings and look for the option ” SATA Controller Mode “, ” AHCI Mode ” or something similar.
2. If the SATA controller is disabl, enable it again
3. Save BIOS changes and reboot the system.
Method 8: Clear CMOS or Settings
1. Turn off your computer and disconnect iceland telegram data the power cable.
2. Open the computer case and ground yourself from shock.
3. Locate the CMOS battery (usually a coin-shap battery) on the motherboard. You can also identify it by the label CMOS , RTC , or Battery .
4. Carefully remove the CMOS battery with your Method Check fingernail or a conductive screwdriver.
Remove the CMOS battery
5. Wait 10-15 seconds, then carefully insert the battery back into the slot.
Reinstall the CMOS battery.
6. If you have CMOS jumpers instead how to write a notice letter of a battery, move the jumper cap from the first and second pins to the second and third pins. If you only have a two-pin jumper, temporarily remove the jumper cap and america email list reinstall it.
7. Some motherboards have a special CMOS button label Clear CMOS or CLR_CMOS. Simply pressing it will reset the memory.
8. After resetting the BIOS, turn on the computer.
Method 9: Update BIOS firmware
1. Visit the manufacturer’s website and Method Check check if there is a BIOS update available. If so, download the latest version.
2. Copy the download BIOS update file to a USB flash drive with the FAT32 file system.
3. Restart your computer and enter the BIOS menu.
4. Find the option “ Update BIOS” or something similar in the BIOS menu.
5. Select the BIOS update file from the USB drive and follow the instructions to start the update process.
6. Once the update is complete, your computer will automatically restart.